Automatic Conveyor Oven -12 mt

Product Picture

Automatic Type Conveyor Ovens

  • Automatic Type Ovens with Conveyor can be U-Turn Type or Tunnel Type in accordance with the customer demands based on the layout of the plant as well as their workflow. Thermo block (heating unit) is designed as a separate section attached to one side of the oven. The energy requirement is minimized thanks to the modulating type of burner we use in thermo block unit.
  • The inner part of heating unit is made of high-quality stainless steel and provides long-term operation without any problem. The air canals are located on the base of oven. As all the jeans are conveyed through the oven and be passing from each point of the oven, there is no shade difference between the jeans of one batch. The temperature measurement taken from different points –mostly from 7 different points- of the oven are indicated on the control panel in digital form so that the temperature of each point is controlled and seen by the operator easily.
  • The burner operation is cut in and out by the control panel according to the average values of measured temperatures within the oven. The conveyor used in our ovens is specially designed Cardan Shaft model conveyors.The trolleys on monorail is freely moving and running while the gap between the jeans hung is 400 mm.
  • The engine of the gear drive system is low revolution DC and reduction gear type.
  • The conveyor speed can be changed by the frequency adjustment device. The speed adjustment can be done between 0.5 m/min – 3 m/min thus the curing time can be adjusted according to the process requirements

Product Video